SMD LED light tube Series

SMD LED Tube light T8
Aone LED Tubes T8 are designed as an economic lighting solution to replace conventional LED tubes T8 CFL tubes. They can be easily installed into LED fluorescent tubes fixtures to replace medium bipin LED tubes T8 and T12 fluorescent tubes ...View more...

SMD LED Tube light T5
SMD LED tubes t5 fluorescent replacement tubes are also designed for replacement of medium bi-pin T5 LED florescent tubes. With an optimized design, our LED tubes T5 can provide white- LED tubes T5 which will not flick and has no RF interference ...View more...
LED light tube usually adopt super bright white-LED gu10 as the LED light source. And their covers are usually made of acrylic or aluminium materials. This tube is designed as a replacement for standard fluorescent lamps.
Comparison with traditional fluorescent tubes:
1. Common points:
LED light tubes have similar exterior appearance design with conventional LED fluorescent tubes.LED tubes T8 with a length of 60cm, 120cm and 150cm are commonly used ones.
2. Differences:
(1)LED light tubes can save more energy.
Traditional fluorescent lights, no matter they are compact fluorescent lamps or tubular fluorescent tubes, all produce lots of heat during their operation. While LED light tubes have high conversion rate between electricity energy and light energy, thus producing lower heat and helping save energy.
(2) A LED fluorescent tubes needs no ballast. While a traditional requires a ballast to stabilize electricity current.
(3)LED light tubes contain no mercury or any other hazard materials, so they are harmless to human body and natural environment.
While conventional fluorescent lights are usually known as low pressure mercury lamps for their containing of mercury. They utilize electricity to excite mercury vapor and then the excited mercury atoms will produce UV light which finally cause phosphors to produce visible light. Once the lamps are broken, the small amount of mercury will contaminate the surrounding environment and do harm to human health.
Advantages of LED light tubes:
1. Environmental friendly
Traditional fluorescent lamp contains large amount of mercury vapor which will do harm to the environment if the lamp is broken up and the vapor volatilize into the atmosphere. On the contrary,LED tubes T8 does not contain mercury or lead, doing no harm to the environment. So,LED tubes T8 products are recognized to be the green lighting lamps in the 21st century.
2. Low heat
Compared to traditional lamps which will generate a large amount of heat LED light tubes can directly make electric energy into light energy, causing less heat and no waste of the energy.
3. Noise-free
LED light tubes will not produce any noise, enabling it to be a good choice for illumination application in high precision electrical instrument. It is also fit to be used in occasions like libraries, offices and so on.
4. Soft light beams and stroboflash-free
Traditional fluorescent lamp uses alternating current, which will generate 100-120 times of stroboflash per second. As to LED light tubes, it can directly switch the alternating current into direct current, without causing any flickering, helpful to protect the eyes.
5. Free of ultraviolet radiation
Traditional lamps will generate ultraviolet radiation, thus will attract mosquitoes to fly around the lamps.LED tubes T5 doesn't have this disadvantage, thus the indoor space will become cleaner.
6. Wide-range of adjustable voltage
Traditional fluorescent lamp should recur to rectifier to release high voltage to get brighten up. If the voltage fell, the lamp will went out. However,LED tubes T8 can be lighted within a certain voltage range (80V-245V) .
7. Energy-saving, long life-span and low cost
The power consumption for LED tubes T5 is lower than 1/3 of the traditional lamp's consumption, and LED tubes T5 life span for it is 10 times longer than that of traditional one. So there is no need to change the lamp for a long period of time, reducing the manpower and other costs.
8. Rigid and safe
LED tubes T8 body is made by epoxy resin instead of glasses like other traditional lamps. So it is more rigid and safe. Even if falling to the floor,LED light tubes will not be broken easily. Users can set their heart at rest when using LED tubes T8 .
As an experienced China LED light manufacturer and supplier, we primarily provide super bright fluorescent light tubes, economic fluorescent LED light tubes,LED tubes T5 and LED tubes T8 , etc. All of them are CE and RoHS certified. And we are located in Shenzhen, China, A-one Led is easy to acquire abundant labors and convenient sea transportation; therefore, we can provide you high quality LED tubes T8 and LED tubes T5 at lower price.
For more detailed LED lights information, please browse our website or contact us directly.